D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
opt
/
psa
/
admin
/
plib
/
modules
/
firewall
/
resources
/
locales
/
Filename :
zh-CN.php
back
Copy
<?php // Copyright 1999-2023. Plesk International GmbH. All rights reserved. $messages = [ 'title' => '防火墙', 'backendNotAvailable' => '从操作系统供应商安装iptables包以使用防火墙模块。', 'permissionDenied' => '拒绝访问', 'noConfiguration' => '无法生成要应用您的配置的shell脚本。', 'unknownAction' => '未知操作', 'execError' => '执行错误', 'notConfirmed' => '无法确认防火墙规则。可能正在运行意外的“Activate firewall configuration（激活防火墙配置）”任务。您可以在任务管理器中查看是否存在此类任务。', 'actionLog' => [ 'enabled' => '防火墙已启用/已禁用', 'activated' => '防火墙规则已激活', ], 'button' => [ 'title' => '防火墙', 'description' => '设置防火墙。', ], 'permissionManageFirewall' => '防火墙', 'swapRules' => [ 'sameRules' => '交换需要两个不同的规则', 'notCustom' => '只有自定义规则可以被交换', 'notEditable' => '一个或两个规则都不属于可编辑的配置', 'differentChains' => '不能交换属于不同链的规则', ], 'copyConfiguration' => [ 'invalidConfiguration' => '指定的配置号码无效。', ], 'addRule' => [ 'missingProperty' => '缺少一个或多个必需的防火墙规则属性。', 'unknownDirection' => '未知方向：%%direction%%', 'unknownAction' => '未知操作：%%action%%', ], 'ruleNotFound' => '未找到规则。', 'ruleNotEditable' => '规则不属于可编辑的配置。', 'remoteAccessRule' => "[SET][%%time%%] 允许客户 '%%customerName%%' 的数据库用户 '%%userName%%' 远程访问", 'notification' => [ 'title' => '规则正在等待您的批准', 'subject' => '针对数据库用户的远程访问规则已被修改，并且正在等待您的批准。', 'message' => '请转到防火墙设置以查看和确认规则。', 'action' => '打开防火墙' ], 'app' => [ 'enable' => '防火墙保护', 'rules' => '防火墙规则', 'editServiceRule' => '服务: %%name%%', 'columnAction' => '操作', 'columnName' => '名称', 'columnDescription' => '描述', 'service' => [ 'dns' => '域名服务器', 'ftp' => 'FTP服务器', 'imap' => 'IMAP (邮件检索)服务器', 'mysql' => 'MySQL服务器', 'ping' => 'Ping服务', 'neighbor_disc' => 'IPv6 邻居发现', 'plesk' => 'Plesk管理界面', 'plesk_http3' => '使用 HTTP/3 的 Plesk 管理界面', 'autoinstaller' => 'Plesk Installer', 'pop3' => 'POP3(邮件检索)服务器', 'poppassd' => '邮件密码变更服务', 'postgresql' => 'PostgreSQL服务器', 'samba' => 'Samba (Windows网络中的文件共享)', 'smtp' => 'SMTP(邮件发送)服务器', 'smtp_submission' => 'SMTP(提交端口)服务器', 'ssh' => 'SSH(安全外壳)服务器', 'www' => 'WWW服务器', 'www_http3' => '使用 HTTP/3 的 WWW 服务器', 'ftp_passive' => 'FTP服务器被动端口', 'dhcp' => 'DHCP 客户端', 'custom' => '自定义服务', ], 'catchall' => [ 'forward' => '流量转发的系统策略', 'input' => '接收流量的系统策略', 'output' => '发送流量的系统策略', ], 'unknownRule' => '未知', 'hint' => [ 'catchall' => '此系统策略控制上述规则允许或拒绝的所有连线。', 'custom' => '此自定义规则控制访问用户定义设置相关连线。', 'service' => [ 'dns' => '此规则控制访问此主机上的域名服务器。', 'ftp' => '此规则控制访问此主机上的FTP服务器。', 'imap' => '此规则控制访问主机上的IMAP(邮件检索)服务器。', 'mysql' => '此规则控制访问此主机上的MySQL服务器。', 'samba' => '此规则控制访问服务器上的共享资源。', 'ping' => '此规则控制哪些其它电脑会ping此主机。', 'plesk' => '此规则控制访问此主机上的Plesk管理界面。', 'plesk_http3' => '此规则控制在此主机上使用 HTTP/3 访问 Plesk 管理界面。', 'pop3' => '此规则控制访问此主机上的POP3(邮件检索)服务器。', 'poppassd' => '此规则控制访问此主机上的邮件密码变更服务。', 'postgresql' => '此规则控制访问此主机上的PostgreSQL服务器。', 'smtp' => '此规则控制访问此主机上的SMTP(邮件发送)服务器。', 'smtp_submission' => '此规则控制访问主机上的SMTP提交。', 'ssh' => '此规则控制访问此主机上的SSH(安全外壳)服务器。', 'www' => '此规则控制访问此主机上的WWW服务器。', 'www_http3' => '此规则控制在此主机上使用 HTTP/3 访问 WWW 服务器。', 'neighbor_disc' => '此规则控制访问此主机上的 IPv6 Neighbor Discovery。', 'autoinstaller' => '此规则控制访问此主机上的Plesk Installer。', 'ftp_passive' => '此规则控制访问此主机上的FTP服务器被动端口。', 'dhcp' => '此规则控制访问此主机上的 DHCP 客户端。', 'custom' => '此规则控制访问此主机上的自定义服务。', ] ], 'description' => [ 'custom' => [ 'forward' => '%%action%% 在 %%ports%% 上从 %%from%% 转发至 %%to%%', 'input' => '%%action%% 在 %%ports%% 上接收自 %%from%%', 'output' => '%%action%% 在 %%ports%% 上传出至 %%to%%', ], 'service' => [ 'forward' => '%%action%% 从 %%from%% 转发至 %%to%%', 'input' => '%%action%% 接收自 %%from%%', 'output' => '%%action%% 传出至 %%to%%', ], 'catchall' => [ 'forward' => '%%action%% 转发所有其他流量', 'input' => '%%action%% 所有其他接收流量', 'output' => '%%action%% 所有其他传出流量', ], ], 'fromAll' => '所有', 'toAll' => '全部', 'port' => '端口 %%ports%%', 'ports' => '端口 %%ports%%', 'allPorts' => '所有端口', 'denyFromOther' => '拒绝接收来自所有其它的', 'action' => [ 'allow' => '允许', 'deny' => '拒绝', 'custom' => '允许', ], 'toolbar' => [ 'toolbarGroupActions' => '操作', 'search' => '搜索中...', 'groupAdd' => '添加', 'buttonAdd' => '添加规则', 'buttonAddHint' => '添加防火墙规则', 'groupActions' => '操作', 'buttonRemove' => '删除', 'buttonRemoveHint' => '移除选定的防火墙规则。', 'buttonExport' => '导出', 'buttonExportHint' => '将所有防火墙规则导出为一个 JSON 文件。', 'buttonImport' => '导入', 'buttonImportHint' => '从一个 JSON 文件导入防火墙规则。', 'yesRemove' => '是的，移除', 'cancel' => '取消', 'removeEmptySelection' => '选择一个或多个要移除的防火墙规则。', 'removeConfirmation' => '要移除选定的防火墙规则吗？', 'removeSuccess' => '选定的防火墙规则已被移除。', 'importSuccess' => '已导入防火墙规则。', ], 'showActiveConfiguration' => '这是活动的防火墙配置。%%link%%', 'showActiveConfigurationLink' => '返回到编辑。', 'modifiedRules' => [ 'warning' => '防火墙配置有未保存的更改。%%link%%', 'showActive' => '显示活动的配置。', 'buttonApply' => '应用更改', 'buttonDiscard' => '丢弃', ], 'preview' => [ 'titleEnable' => '启用防火墙保护和规则管理', 'titleApplyChanges' => '应用修改', 'text' => '生成了一个shell脚本，以将规则和策略的当前配置应用到系统中。', 'show' => '预览脚本', 'hide' => '隐藏', 'vzNotice' => '您正在使用 Virtuozzo 容器。请确保防火墙适用于容器（已加载了iptabble模块）。', 'warningCustomRulesOverwritten' => '任何通过iptabble实用程序直接添加的防火墙规则都将被覆盖。', 'buttonEnable' => '应用', 'buttonCancel' => '取消', ], 'ruleEditForm' => [ 'ruleName' => '规则名称', 'ipDescription' => [ 'address' => 'IP 地址（例如 192.168.0.1 or fc00::1），网络（例如 192.168.0.0/16 or fc00::/7）或者 %%countryCode%%', 'countryCode' => '两个字母的ISO 3166国家代码（例如，AF或ZW)', 'dataProvided' => 'IP地理位置数据当前由 %%geoIpProvider%% 提供。', 'learnMore' => '了解如何切换到另一个数据源', 'provider' => [ 'dpIpLite' => 'DB-IP', 'maxmind' => 'GeoIP2 来自 MaxMind', 'maxmindLite' => 'GeoLite2 来自 MaxMind', ] ], 'matchDirection' => [ 'title' => '匹配说明', 'incoming' => '来件', 'outgoing' => '发件', 'forwarding' => '转发', ], 'actions' => [ 'allow' => '允许', 'deny' => '拒绝', 'custom' => '允许所选资源，拒绝其他资源', ], 'ports' => [ 'title' => '端口', 'description' => '要筛选的端口（例如1000) 或端口范围（例如1000-1051)。如果该字段为空，则将筛选所有协议和端口。', 'tcp' => 'TCP', 'udp' => 'UDP', ], 'sources' => '来源', 'destinations' => '目的地', 'validationErrors' => [ 'nameIsRequired' => '规则名称必填', 'invalidData' => '无效的数据格式', 'invalidPortFormat' => '无效的端口格式', 'portOutOfRanges' => '端口必须在从1到65535的范围内', 'portsFormat' => '必须用协议（逗号分隔）指定端口或端口范围；例如，1000/tcp, 1000-1051/udp。', 'IPAddressFormat' => 'A malformed firewall rule address was specified.', 'oneOfPortsOutOfRanges' => '其中一个端口超出1到65535的范围', ], 'ruleSavedSuccessfully' => '该规则已保存成功', 'newRuleDefaultName' => '新自定义规则', ], 'successEnable' => '防火墙保护已启用。', 'successDisable' => '防火墙保护已禁用。', 'successApplyChanges' => '当前的配置已应用。', 'successDiscardChanges' => '更改已被弃用。', 'FormField' => [ 'addMore' => '再添加一个', ], 'Form' => [ 'submitButton' => '保存', 'cancelButton' => '取消', ], 'List' => [ 'totalRows' => "共计 %%totalRows%% 个项目", 'selectedRows' => "已选定 %%selectedRows%%（共计： %%totalRows%%）个项目", 'selectAll' => "全选", 'deselectAll' => "取消选定", 'all' => "全部", ], 'Pagination' => [ 'total' => "%%current%%（共计 %%total%%）", 'itemsPerPage' => "每页的项目", 'all' => "全部", ], ], 'tasks' => [ 'activate' => [ 'running' => '正在应用防火墙配置......', 'done' => '防火墙配置已应用。', 'error' => '应用防火墙配置失败。', ], ], 'cli' => [ 'commands' => [ 'apply' => 'Apply the current firewall rules and update the active configuration.', 'confirm' => 'Confirm the previously applied configuration.', 'disable' => 'Disable firewall rules management.', 'enable' => 'Enable firewall rules management.', 'is-enabled' => 'Check whether the firewall is enabled.', 'reset' => 'Revert the current firewall rules to the last active configuration.', 'reset-to-default' => 'Revert current firewall rules back to default configuration.', 'set-rule' => 'Create a new or update an existing firewall rule.', 'remove-rules' => 'Remove the specified firewall rules.', 'list-json' => 'List the firewall rules as JSON.', 'export' => 'Export firewall rules to JSON.', 'import' => 'Import firewall rules from JSON.', ], 'options' => [ 'id' => 'ID of the firewall rule required for the update operation, which runs using the --set-rule command.', 'ids' => 'IDs of the firewall rules (comma-separated) required for the remove operation, which runs using the --remove-rules command.', 'name' => 'Firewall rule name.', 'direction' => 'Firewall rule direction. Allowed values: input, output, forward.', 'action' => 'Firewall rule action. Allowed values: allow, deny.', 'ports' => 'Firewall rule ports or port ranges with a protocol (comma-separated); for example, 1000/tcp,1000-1051/udp.', 'remote-addresses' => 'The list of the firewall rule addresses (comma-separated). An address can be an IP address (for example, 192.168.0.1 or fc00::1), a network (for example, 192.168.0.0/16 or fc00::/7), or a two-letter ISO 3166 country code (for example, AF or ZW).', 'from' => 'The list of the firewall rule addresses (comma-separated) for forwarding and incoming connections. An address can be an IP address (for example, 192.168.0.1 or fc00::1), a network (for example, 192.168.0.0/16 or fc00::/7), or a two-letter ISO 3166 country code (for example, AF or ZW).', 'to' => 'The list of the firewall rule addresses (comma-separated) for forwarding and outgoing connections. An address can be an IP address (for example, 192.168.0.1 or fc00::1), a network (for example, 192.168.0.0/16 or fc00::/7), or a two-letter ISO 3166 country code (for example, AF or ZW).', 'config' => 'The source from which firewall rules will be imported. Specify \'-\' to import firewall rules from standard input (default, recommended), a file path, or a URL.', 'auto-confirm-this-may-lock-me-out-of-the-server' => 'Use this with the --apply or --enable commands to avoid having to run the --confirm command from a separate SSH session. Use this only in automated deployment scenarios. Misconfigured firewall rules may prevent you from having access to the server.', ], 'errors' => [ 'is_disabled' => 'Firewall rules management is disabled.', 'confirm_failed_apply' => 'Apply your changes first.', 'confirm_failed_connection' => 'To apply and confirm changes, run each corresponding command in a separate SSH session.', 'confirm_failed' => 'Unable to confirm the firewall rules.', 'set_rule_failed_id' => 'A firewall rule id must be numeric.', 'set_rule_failed_name' => 'A firewall rule name must be specified.', 'set_rule_failed_ports' => 'A malformed firewall rule port or port range was specified.', 'failed_existing_config' => 'The configuration file does not exist or is not accessible. Try using the \'%%command%%\' command instead.', 'failed_available_url_config' => 'The configuration file URL is not available: %%error%%', 'remove_rules_not_found' => 'No firewall rules were found for removal.', ], 'actions' => [ 'apply_success' => 'The firewall rules were activated. To save your changes, run the --confirm command within %%seconds%% second(s).', 'confirm_noop' => 'The firewall rules were already confirmed, or no --apply or --enable command was issued beforehand.', 'confirm_success' => 'The firewall rules were confirmed.', 'confirm_enable_success' => 'Firewall rules management was confirmed.', 'reset_success' => 'Changes to the firewall rules were reverted.', 'reset_to_default_success' => 'The firewall rules were reverted to the default configuration.', 'enable_success' => 'Firewall rules management was enabled. To save your changes, run the --confirm command within %%seconds%% second(s).', 'disable_success' => 'Firewall rules management was disabled', 'set_rule_success_create' => 'The firewall rule was created with the ID: \'%%ruleId%%\'.', 'set_rule_success_update' => 'The firewall rule was updated with the ID: \'%%ruleId%%\'.', 'remove_rules_success' => 'The firewall rules were removed.', 'import_success' => 'The firewall rules were imported. To apply your changes, run the --apply command.', ], ], ];