D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
local
/
psa
/
etc
/
awstats
/
Filename :
awstats.sarainternational.ae-http.conf
back
Copy
#ATTENTION! # #DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY, #SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED. # AWSTATS CONFIGURE FILE 7.3 #----------------------------------------------------------------------------- # Copy this file into awstats.www.mydomain.conf and edit this new config file # to setup AWStats (See documentation in docs/ directory). # The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for # Unix/Linux) or same directory as awstats.pl (Windows, Mac, Unix/Linux...) # To include an environment variable in any parameter (AWStats will replace # it with its value when reading it), follow the example: # Parameter="__ENVNAME__" # Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with # the config value in an AWStats running session and can be used like others. #----------------------------------------------------------------------------- #----------------------------------------------------------------------------- # MAIN SETUP SECTION (Required to make AWStats work) #----------------------------------------------------------------------------- # "LogFile" contains the web, ftp or mail server log file to analyze. # Possible values: A full path, or a relative path from awstats.pl directory. # Example: "/var/log/apache/access.log" # Example: "../logs/mycombinedlog.log" # You can also use tags in this filename if you need a dynamic file name # depending on date or time (Replacement is made by AWStats at the beginning # of its execution). These are the available tags : # %YYYY-n is replaced with 4 digits year we were n hours ago # %YY-n is replaced with 2 digits year we were n hours ago # %MM-n is replaced with 2 digits month we were n hours ago # %MO-n is replaced with 3 letters month we were n hours ago # %DD-n is replaced with day we were n hours ago # %HH-n is replaced with hour we were n hours ago # %NS-n is replaced with number of seconds at 00:00 since 1970 # %WM-n is replaced with the week number in month (1-5) # %Wm-n is replaced with the week number in month (0-4) # %WY-n is replaced with the week number in year (01-52) # %Wy-n is replaced with the week number in year (00-51) # %DW-n is replaced with the day number in week (1-7, 1=sunday) # use n=24 if you need (1-7, 1=monday) # %Dw-n is replaced with the day number in week (0-6, 0=sunday) # use n=24 if you need (0-6, 0=monday) # Use 0 for n if you need current year, month, day, hour... # Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log" # Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log" # You can also use a pipe if log file come from a pipe : # Example: "gzip -cd /var/log/apache/access.log.gz |" # If there are several log files from load balancing servers : # Example: "/pathtotools/logresolvemerge.pl *.log |" # LogFile="/var/www/vhosts/system/sarainternational.ae/logs/access_log" # Enter the log file type you want to analyze. # Possible values: # W - For a web log file # S - For a streaming log file # M - For a mail log file # F - For an ftp log file # Example: W # Default: W # LogType=W # Enter here your log format (Must match your web server config. See setup # instructions in documentation to know how to configure your web server to # have the required log format). # Possible values: 1,2,3,4 or "your_own_personalized_log_format" # 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format) # 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA. # 3 - Webstar native log format. # 4 - Apache or Squid native common log format (NCSA common/CLF log format) # With LogFormat=4, some features (browsers, os, keywords...) can't work. # "your_own_personalized_log_format" = If your log is ftp, mail or other format, # you must use following keys to define the log format string (See FAQ for # ftp, mail or exotic web log format examples): # %host Client hostname or IP address (or Sender host for mail log) # %host_r Receiver hostname or IP address (for mail log) # %lognamequot Authenticated login/user with format: "john" # %logname Authenticated login/user with format: john # %time1 Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss] # %time2 Date and time with format: yyyy-mm-dd hh:mm:ss # %time3 Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy # %time4 Date and time with unix timestamp format: dddddddddd # %time5 Date and time with format iso: yyyy-mm-ddThh:mm:ss, with optional timezone specification (ignored) # %time6 Date and time with format: dd/mm/yyyy, hh:mm:ss # %methodurl Method and URL with format: "GET /index.html HTTP/x.x" # %methodurlnoprot Method and URL with format: "GET /index.html" # %method Method with format: GET # %url URL only with format: /index.html # %query Query string (used by URLWithQuery option) # %code Return code status (with format for web log: 999) # %bytesd Size of document in bytes # %refererquot Referer page with format: "http://from.com/from.htm" # %referer Referer page with format: http://from.com/from.htm # %uabracket User agent with format: [Mozilla/4.0 (compatible, ...)] # %uaquot User agent with format: "Mozilla/4.0 (compatible, ...)" # %ua User agent with format: Mozilla/4.0_(compatible...) # %gzipin mod_gzip compression input bytes: In:XXX # %gzipout mod_gzip compression output bytes & ratio: Out:YYY:ZZpct. # %gzipratio mod_gzip compression ratio: ZZpct. # %deflateratio mod_deflate compression ratio with format: (ZZ) # %email EMail sender (for mail log) # %email_r EMail receiver (for mail log) # %virtualname Web sever virtual hostname. Use this tag when same log # contains data of several virtual web servers. AWStats # will discard records not in SiteDomain nor HostAliases # %cluster If log file is provided from several computers (merged by # logresolvemerge.pl), use this to define cluster id field. # %extraX Another field that you plan to use for building a # personalized report with ExtraSection feature (See later). # If your log format has some fields not included in this list, use: # %other Means another not used field # %otherquot Means another not used double quoted field # If your log format has some literal strings, which precede data fields, use # status=%code Means your log files have HTTP status logged as "status=200" # Literal strings that follow data field must be separated from said data fields by space. # # Examples for Apache combined logs (following two examples are equivalent): # LogFormat = 1 # LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot" # # Example for IIS: # LogFormat = 2 # LogFormat=1 # If your log field's separator is not a space, you can change this parameter. # This parameter is not used if LogFormat is a predefined value (1,2,3,4) # Backslash can be used as escape character. # Example: " " # Example: "\t" # Example: "\|" # Example: "," # Default: " " # LogSeparator=" " # "SiteDomain" must contain the main domain name, or the main intranet web # server name, used to reach the web site. # If you share the same log file for several virtual web servers, this # parameter is used to tell AWStats to filter record that contains records for # this virtual host name only (So check that this virtual hostname can be # found in your log file and use a personalized log format that include the # %virtualname tag). # But for multi hosting a better solution is to have one log file for each # virtual web server. In this case, this parameter is only used to generate # full URL's links when ShowLinksOnUrl option is set to 1. # If analyzing mail log, enter here the domain name of mail server. # Example: "myintranetserver" # Example: "www.domain.com" # Example: "ftp.domain.com" # Example: "domain.com" # SiteDomain="sarainternational.ae" # Enter here all other possible domain names, addresses or virtual host # aliases someone can use to access your site. Try to keep only the minimum # number of possible names/addresses to have the best performances. # You can repeat the "SiteDomain" value in this list. # This parameter is used to analyze referer field in log file and to help # AWStats to know if a referer URL is a local URL of same site or a URL of # another site. # Note: Use space between each value. # Note: You can use regular expression values writing value with REGEX[value]. # Note: You can also use @/mypath/myfile if list of aliases are in a file. # Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]" # HostAliases="localhost 127.0.0.1" # If you want to have hosts reported by name instead of ip address, AWStats # needs to make reverse DNS lookups (if not already done in your log file). # With DNSLookup to 0, all hosts will be reported by their IP addresses and # not by the full hostname of visitors (except if names are already available # in log file). # If you want/need to set DNSLookup to 1, don't forget that this will # dramatically reduce AWStats's update process speed. Do not use on large web # sites. # Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6). # Note: Result of DNS Lookup can be used to build the Country report. However # it is highly recommanded to enable the plugin 'geoip', 'geoipfree', or 'geoip2' # to have an accurate Country report with no need for DNS Lookup. # Possible values: # 0 - No DNS Lookup # 1 - DNS Lookup is fully enabled # 2 - DNS Lookup is made only from static DNS cache file (if it exists) # Default: 2 # DNSLookup=2 # For very large sites, setting DNSLookup to 0 (or 2) might be the only # reasonable choice. DynamicDNSLookup allows to resolve host names for # items shown in html tables only, when data is output on reports instead # of resolving once during log analysis step. # Possible values: # 0 - No dynamic DNS lookup # 1 - Dynamic DNS lookup enabled # 2 - Dynamic DNS lookup enabled (including static DNS cache file as a second # source) # Default: 0 # DynamicDNSLookup=0 # When AWStats updates its statistics, it stores results of its analysis in # files (AWStats database). All those files are written in the directory # defined by the "DirData" parameter. Set this value to the directory where # you want AWStats to save its database and working files into. # Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser" # feature (see later), you need "Write" permissions by web server user on this # directory (and "Modify" for Windows NTFS file systems). # Example: "/var/lib/awstats" # Example: "../data" # Example: "C:/awstats_data_dir" # Default: "." (means same directory as awstats.pl) # DirData="/var/www/vhosts/system/sarainternational.ae/statistics/webstat" # Relative or absolute web URL of your awstats cgi-bin directory. # This parameter is used only when AWStats is run from command line # with -output option (to generate links in HTML reported page). # Example: "/awstats" # Default: "/cgi-bin" (means awstats.pl is in "/yourwwwroot/cgi-bin") # DirCgi="/cgi-bin" # Relative or absolute web URL of your awstats icon directory. # If you build static reports ("... -output > outputpath/output.html"), enter # path of icon directory relative to the output directory 'outputpath'. # Example: "/awstatsicons" # Example: "../icon" # Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon") # DirIcons="/awstats-icon" # When this parameter is set to 1, AWStats adds a button on the report page to # allow to "update" statistics from a web browser. Warning, when "update" is # made from a browser, AWStats is run as a CGI by the web server user defined # in your web server (user "nobody" by default with Apache, "IUSR_XXX" with # IIS), so the "DirData" directory and all already existing history files # awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if # necessary to "Read/Write" (and "Modify" for Windows NTFS file systems). # Warning: Update process can be long so you might experience "time out" # browser errors if you don't launch AWStats frequently enough. # When set to 0, update is only made when AWStats is run from the command # line interface (or a task scheduler). # Possible values: 0 or 1 # Default: 0 # AllowToUpdateStatsFromBrowser=0 # AWStats saves and sorts its database on a monthly basis (except if using # databasebreak option from command line). # However, if you choose the -month=all from command line or # value '-Year-' from CGI combo form to have a report for all year, AWStats # needs to reload all data for full year (each month), and sort them, # requiring a large amount of time, memory and CPU. This might be a problem # for web hosting providers that offer AWStats for large sites, on shared # servers, to non CPU cautious customers. # For this reason, the 'full year' is only enabled on Command Line by default. # You can change this by setting this parameter to 0, 1, 2 or 3. # Possible values: # 0 - Never allowed # 1 - Allowed on CLI only, -Year- value in combo is not visible # 2 - Allowed on CLI only, -Year- value in combo is visible but not allowed # 3 - Possible on CLI and CGI # Default: 2 # AllowFullYearView=2 #----------------------------------------------------------------------------- # OPTIONAL SETUP SECTION (Not required but enhances AWStats's functionality) #----------------------------------------------------------------------------- # When the update process runs, AWStats can set a lock file in TEMP or TMP # directory. This lock is to avoid to have 2 update processes running at the # same time to prevent unknown conflicts problems and avoid DoS attacks when # AllowToUpdateStatsFromBrowser is set to 1. # Because, when you use lock file, you can sometimes experience problems if # lock file is not correctly removed (killed process for example requires that # you remove the file manually), this option is not enabled by default (Do # not enable this option with no console server access). # Change : Effective immediately # Possible values: 0 or 1 # Default: 0 # EnableLockForUpdate=0 # AWStats can do reverse DNS lookups through a static DNS cache file that was # previously created manually. If no path is given in static DNS cache file # name, AWStats will search DirData directory. This file is never changed. # This option is not used if DNSLookup=0. # Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname' # or just 'ipaddress resolved_hostname' # Change : Effective for new updates only # Example: "/mydnscachedir/dnscache" # Default: "dnscache.txt" # DNSStaticCacheFile="dnscache.txt" # AWStats can do reverse DNS lookups through a DNS cache file that was created # by a previous run of AWStats. This file is erased and recreated after each # statistics update process. You don't need to create and/or edit it. # AWStats will read and save this file in DirData directory. # This option is used only if DNSLookup=1. # Note: If a DNSStaticCacheFile is available, AWStats will check for DNS # lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile. # Change : Effective for new updates only # Example: "/mydnscachedir/dnscachelastupdate" # Default: "dnscachelastupdate.txt" # DNSLastUpdateCacheFile="dnscachelastupdate.txt" # You can specify specific IP addresses that should NOT be looked up in DNS. # This option is used only if DNSLookup=1. # Note: Use space between each value. # Note: You can use regular expression values writing value with REGEX[value]. # Change : Effective for new updates only # Example: "123.123.123.123 REGEX[^192\.168\.]" # Default: "" # SkipDNSLookupFor="" # The following two parameters allow you to protect a config file from being # read by AWStats when called from a browser if the web user has not been # authenticated. Your AWStats program must be in a web protected "realm" (With # Apache, you can use .htaccess files to do so. With other web servers, see # your server setup manual). # Change : Effective immediately # Possible values: 0 or 1 # Default: 0 # AllowAccessFromWebToAuthenticatedUsersOnly=0 # This parameter gives the list of all authorized authenticated users to view # statistics for this domain/config file. This parameter is used only if # AllowAccessFromWebToAuthenticatedUsersOnly is set to 1. # Change : Effective immediately # Example: "user1 user2" # Example: "__REMOTE_USER__" # Default: "" # AllowAccessFromWebToFollowingAuthenticatedUsers="" # When this parameter is defined to something, the IP address of the user that # reads its statistics from a browser (when AWStats is used as a CGI) is # checked and must match one of the IP address values or ranges. # Change : Effective immediately # Example: "127.0.0.1 123.123.123.1-123.123.123.255" # Default: "" # AllowAccessFromWebToFollowingIPAddresses="" # If the "DirData" directory (see above) does not exist, AWStats returns an # error. However, you can ask AWStats to create it. # This option can be used by some Web Hosting Providers that have defined a # dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and # don't want to have to create a new directory each time they add a new user. # Change : Effective immediately # Possible values: 0 or 1 # Default: 0 # CreateDirDataIfNotExists=0 # You can choose in which format the AWStats history database is saved. # Note: Using "xml" format makes AWStats database files three times larger than # using "text" format. # Change : Database format is switched after next update # Possible values: text or xml # Default: text # BuildHistoryFormat=text # If you prefer having the report output pages be built as XML compliant pages # instead of simple HTML pages, you can set this to 'xhtml' (May not work # properly with old browsers). # Change : Effective immediately # Possible values: html or xhtml # Default: html # BuildReportFormat=html # AWStats databases can be updated from command line or from a browser (when # used as a cgi program). So AWStats database files need write permission # for both command line user and default web server user ('nobody' for Unix, # 'IUSR_xxx' for IIS/Windows,...). # To avoid permission problems between update process (run by an admin user) # and CGI process (ran by a low level user), AWStats can save its database # files with read and write permissions for everyone. # By default, AWStats keeps default user permissions on updated files. If you # set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1. # Change : Effective for new updates only # Possible values: 0 or 1 # Default: 0 # SaveDatabaseFilesWithPermissionsForEveryone=0 # AWStats can purge log file, after analyzing it. Note that AWStats is able # to detect new lines in a log file, to process only them, so you can launch # AWStats as often as you want, even with this parameter to 0. # With 0, no purge is made, so you must use a scheduled task or a web server # that make this purge frequently. # With 1, the purge of the log file is made each time AWStats update is run. # This parameter doesn't work with IIS (This web server doesn't let its log # file to be purged). # Change : Effective for new updates only # Possible values: 0 or 1 # Default: 0 # PurgeLogFile=0 # When PurgeLogFile is set to 1, AWStats will clean your log file after # processing it. You can however keep an archive file of all processed log # records by setting this parameter (For example if you want to use another # log analyzer). The archived log file is saved in "DirData" with name # awstats_archive.configname[.suffix].log # This parameter is not used if PurgeLogFile=0 # Change : Effective for new updates only # Possible values: 0, 1, or tags (See LogFile parameter) for suffix # Example: 1 # Example: %YYYY%MM%DD # Default: 0 # ArchiveLogRecords=0 # Each time you run the update process, AWStats overwrites the 'historic file' # for the month (awstatsMMYYYY[.*].txt) with the updated one. # When write errors occur (IO, disk full,...), this historic file can be # corrupted and must be deleted. Because this file contains information of all # past processed log files, you will lose old stats if removed. So you can # ask AWStats to save last non corrupted file in a .bak file. This file is # stored in "DirData" directory with other 'historic files'. # Change : Effective for new updates only # Possible values: 0 or 1 # Default: 0 # KeepBackupOfHistoricFiles=0 # Default index page name for your web server. # Change : Effective for new updates only # Example: "index.php index.html default.html" # Default: "index.php index.html" # DefaultFile="index.php index.html" # Do not include access from clients that match following criteria. # If your log file contains IP addresses in host field, you must enter here # matching IP addresses criteria. # If DNS lookup is already done in your log file, you must enter here hostname # criteria, else enter ip address criteria. # The opposite parameter of "SkipHosts" is "OnlyHosts". # Note: Use space between each value. This parameter is not case sensitive. # Note: You can use regular expression values writing value with REGEX[value]. # Change : Effective for new updates only # Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]" # Example: "localhost REGEX[^.*\.localdomain$]" # Default: "" # SkipHosts="" # Do not include access from clients with a user agent that match following # criteria. If you want to exclude a robot, you should update the robots.pm # file instead of this parameter. # The opposite parameter of "SkipUserAgents" is "OnlyUserAgents". # Note: Use space between each value. This parameter is not case sensitive. # Note: You can use regular expression values writing value with REGEX[value]. # Change : Effective for new updates only # Example: "konqueror REGEX[ua_test_v\d\.\d]" # Default: "" # SkipUserAgents="" # Use SkipFiles to ignore access to URLs that match one of following entries. # You can enter a list of not important URLs (like framed menus, hidden pages, # etc...) to exclude them from statistics. You must enter here exact relative # URL as found in log file, or a matching REGEX value. Check apply on URL with # all its query paramaters. # For example, to ignore /badpage.php, just add "/badpage.php". To ignore all # pages in a particular directory, add "REGEX[^\/directorytoexclude]". # The opposite parameter of "SkipFiles" is "OnlyFiles". # Note: Use space between each value. This parameter is or not case sensitive # depending on URLNotCaseSensitive parameter. # Note: You can use regular expression values writing value with REGEX[value]. # Change : Effective for new updates only # Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]" # Default: "" # SkipFiles="" # Use SkipReferrersBlackList if you want to exclude records coming from a SPAM # referrer. Parameter must receive a local file name containing rules applied # on referrer field. If parameter is empty, no filter is applied. # An example of such a file is available in lib/blacklist.txt # Change : Effective for new updates only # Example: "/mylibpath/blacklist.txt" # Default: "" # # WARNING!! Using this feature make AWStats running very slower (5 times slower # with black list file provided with AWStats ! # SkipReferrersBlackList="" # Include in stats, only accesses from hosts that match one of following # entries. For example, if you want AWStats to filter access to keep only # stats for visits from particular hosts, you can add those host names in # this parameter. # If DNS lookup is already done in your log file, you must enter here hostname # criteria, else enter ip address criteria. # The opposite parameter of "OnlyHosts" is "SkipHosts". # Note: Use space between each value. This parameter is not case sensitive. # Note: You can use regular expression values writing value with REGEX[value]. # Change : Effective for new updates only # Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]" # Default: "" # OnlyHosts="" # Include in stats, only accesses from user agent that match one of following # entries. For example, if you want AWStats to filter access to keep only # stats for visits from particular browsers, you can add their user agents # string in this parameter. # The opposite parameter of "OnlyUserAgents" is "SkipUserAgents". # Note: Use space between each value. This parameter is not case sensitive. # Note: You can use regular expression values writing value with REGEX[value]. # Change : Effective for new updates only # Example: "msie" # Default: "" # OnlyUserAgents="" # Include in stats, only accesses from authenticated users that match one of # following entries. For example, if you want AWStats to filter access to keep # only stats for authenticated users, you can add those users names in # this parameter. Useful for statistics for per user ftp logs. # Note: Use space between each value. This parameter is not case sensitive. # Note: You can use regular expression values writing value with REGEX[value]. # Change : Effective for new updates only # Example: "john bob REGEX[^testusers]" # Default: "" # OnlyUsers="" # Include in stats, only accesses to URLs that match one of following entries. # For example, if you want AWStats to filter access to keep only stats that # match a particular string, like a particular directory, you can add this # directory name in this parameter. # The opposite parameter of "OnlyFiles" is "SkipFiles". # Note: Use space between each value. This parameter is or not case sensitive # depending on URLNotCaseSensitive parameter. # Note: You can use regular expression values writing value with REGEX[value]. # Change : Effective for new updates only # Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]" # Default: "" # OnlyFiles="" # Add here a list of kind of url (file extension) that must be counted as # "Hit only" and not as a "Hit" and "Page/Download". You can set here all # image extensions as they are hit downloaded that must be counted but they # are not viewed pages. URLs with such extensions are not included in the TOP # Pages/URL report. # Note: If you want to exclude particular URLs from stats (No Pages and no # Hits reported), you must use SkipFiles parameter. # Change : Effective for new updates only # Example: "css js class gif jpg jpeg png bmp ico rss xml swf zip arj rar gz z bz2 wav mp3 wma mpg avi" # Example: "" # Default: "css js class gif jpg jpeg png bmp ico rss xml swf eot woff woff2" # NotPageList="css js class gif jpg jpeg png bmp ico rss xml swf eot woff woff2" # By default, AWStats considers that records found in web log file are # successful hits if HTTP code returned by server is a valid HTTP code (200 # and 304). Any other code are reported in HTTP status chart. # Note that HTTP 'control codes', like redirection (302, 305) are not added by # default in this list as they are not pages seen by a visitor but are # protocol exchange codes to tell the browser to ask another page. Because # this other page will be counted and seen with a 200 or 304 code, if you # add such codes, you will have 2 pages viewed reported for only one in facts. # Change : Effective for new updates only # Example: "200 304 302 305" # Default: "200 304" # ValidHTTPCodes="200 304" # By default, AWStats considers that records found in mail log file are # successful mail transfers if field that represent return code in analyzed # log file match values defined by this parameter. # Change : Effective for new updates only # Example: "1 250 200" # Default: "1 250" # ValidSMTPCodes="1 250" # By default, AWStats only records info on 404 'Document Not Found' errors. # At the cost of additional processing time, further info pages can be made # available by adding codes below. # Change : Effective for new updates only # Example: "403 404" # Default: "404" # TrapInfosForHTTPErrorCodes = "400 403 404" # Some web servers on some Operating systems (IIS-Windows) consider that a # login with same value but different case are the same login. To tell AWStats # to also consider them as one, set this parameter to 1. # Change : Effective for new updates only # Possible values: 0 or 1 # Default: 0 # AuthenticatedUsersNotCaseSensitive=0 # Some web servers on some Operating systems (IIS-Windows) considers that two # URLs with same value but different case are the same URL. To tell AWStats to # also considers them as one, set this parameter to 1. # Change : Effective for new updates only # Possible values: 0 or 1 # Default: 0 # URLNotCaseSensitive=0 # Keep or remove the anchor string you can find in some URLs. # Change : Effective for new updates only # Possible values: 0 or 1 # Default: 0 # URLWithAnchor=0 # In URL links, "?" char is used to add parameter's list in URLs. Syntax is: # /mypage.html?param1=value1¶m2=value2 # However, some servers/sites use also other chars to isolate dynamic part of # their URLs. You can complete this list with all such characters. # Change : Effective for new updates only # Example: "?;," # Default: "?;" # URLQuerySeparators="?;" # Keep or remove the query string to the URL in the statistics for individual # pages. This is primarily used to differentiate between the URLs of dynamic # pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two # different pages. # Warning, when set to 1, memory required to run AWStats is dramatically # increased if you have a lot of changing URLs (for example URLs with a random # id inside). Such web sites should not set this option to 1 or use seriously # the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually # URLWithQueryWithoutFollowingParameters). # Change : Effective for new updates only # Possible values: # 0 - URLs are cleaned from the query string (ie: "/mypage.html") # 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y") # Default: 0 # URLWithQuery=0 # When URLWithQuery is on, you will get the full URL with all parameters in # URL reports. But among thoose parameters, sometimes you don't need a # particular parameter because it does not identify the page or because it's # a random ID changing for each access even if URL points to same page. In # such cases, it is higly recommanded to ask AWStats to keep only parameters # you need (if you know them) before counting, manipulating and storing URL. # Enter here list of wanted parameters. For example, with "param", one hit on # /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r # will be reported as 2 hits on /mypage.cgi?param=abc # This parameter is not used when URLWithQuery is 0 and can't be used with # URLWithQueryWithoutFollowingParameters. # Change : Effective for new updates only # Example: "param" # Default: "" # URLWithQueryWithOnlyFollowingParameters="" # When URLWithQuery is on, you will get the full URL with all parameters in # URL reports. But among thoose parameters, sometimes you don't need a # particular parameter because it does not identify the page or because it's # a random ID changing for each access even if URL points to same page. In # such cases, it is higly recommanded to ask AWStats to remove such parameters # from the URL before counting, manipulating and storing URL. Enter here list # of all non wanted parameters. For example if you enter "id", one hit on # /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r # will be reported as 2 hits on /mypage.cgi?param=abc # This parameter is not used when URLWithQuery is 0 and can't be used with # URLWithQueryWithOnlyFollowingParameters. # Change : Effective for new updates only # Example: "PHPSESSID jsessionid" # Default: "" # URLWithQueryWithoutFollowingParameters="" # Keep or remove the query string to the referrer URL in the statistics for # external referrer pages. This is used to differentiate between the URLs of # dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y # are counted as two different referrer pages. # Change : Effective for new updates only # Possible values: # 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html") # 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y") # Default: 0 # URLReferrerWithQuery=0 # AWStats can detect setup problems or show you important informations to have # a better use. Keep this to 1, except if AWStats says you can change it. # Change : Effective immediately # Possible values: 0 or 1 # Default: 1 # WarningMessages=1 # When an error occurs, AWStats outputs a message related to errors. If you # want (in most cases for security reasons) to have no error messages, you # can set this parameter to your personalized generic message. # Change : Effective immediately # Example: "An error occurred. Contact your Administrator" # Default: "" # ErrorMessages="" # AWStat can be run with debug=x parameter to output various informations # to help in debugging or solving troubles. If you want to allow this (not # enabled by default for security reasons), set this parameter to 0. # Change : Effective immediately # Possible values: 0 or 1 # Default: 0 # DebugMessages=0 # To help you to detect if your log format is good, AWStats reports an error # if all the first NbOfLinesForCorruptedLog lines have a format that does not # match the LogFormat parameter. # However, some worm virus attack on your web server can result in a very high # number of corrupted lines in your log. So if you experience awstats stop # because of bad virus records at the beginning of your log file, you can # increase this parameter (very rare). # Change : Effective for new updates only # Default: 50 # NbOfLinesForCorruptedLog=50 # For some particular integration needs, you may want to have CGI links to # point to another script than awstats.pl. # Use the name of this script in WrapperScript parameter. # Change : Effective immediately # Example: "awstatslauncher.pl" # Example: "awstatswrapper.cgi?key=123" # Default: "" # WrapperScript="" # DecodeUA must be set to 1 if you use Roxen web server. This server converts # all spaces in user agent field into %20. This make the AWStats robots, OS # and browsers detection fail in some cases. Just change it to 1 if and only # if your web server is Roxen. # Change : Effective for new updates only # Possible values: 0 or 1 # Default: 0 # DecodeUA=0 # MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous # things, that can not be tracked on other way, like: # - Javascript disabled # - Java enabled # - Screen size # - Color depth # - Macromedia Director plugin # - Macromedia Shockwave plugin # - Realplayer G2 plugin # - QuickTime plugin # - Mediaplayer plugin # - Acrobat PDF plugin # To enable all these features, you must copy the awstats_misc_tracker.js file # into a /js/ directory stored in your web document root and add the following # HTML code at the end of your index page (but before </BODY>) : # # <script type="text/javascript" src="/js/awstats_misc_tracker.js"></script> # <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript> # # If code is not added in index page, all those detection capabilities will be # disabled. You must also check that ShowScreenSizeStats and ShowMiscStats # parameters are set to 1 to make results appear in AWStats report page. # If you want to use another directory than /js/, you must also change the # awstatsmisctrackerurl variable into the awstats_misc_tracker.js file. # Change : Effective for new updates only. # Possible value: URL of javascript tracker file added in your HTML code. # Default: "/js/awstats_misc_tracker.js" # MiscTrackerUrl="/js/awstats_misc_tracker.js" # AddLinkToExternalCGIWrapper can be used to add a link to a wrapper script # into each title of Dolibarr reports. This can be used to add a wrapper # to download data into a CSV file for example. # # AddLinkToExternalCGIWrapper="/awstats/awdownloadcsv.pl" #----------------------------------------------------------------------------- # OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features) #----------------------------------------------------------------------------- # The following values allow you to define accuracy of AWStats entities # (robots, browsers, os, referers, file types) detection. # It might be a good idea for large web sites or ISP that provides AWStats to # high number of customers, to set this parameter to 1 (or 0), instead of 2. # Possible values: # 0 = No detection, # 1 = Medium/Standard detection # 2 = Full detection # Change : Effective for new updates only # Note : LevelForBrowsersDetection can also accept value "allphones". This # enable detailed detection of phone/pda browsers. # Default: 2 (0 for LevelForWormsDetection) # LevelForBrowsersDetection=2 # 0 disables Browsers detection. # 2 reduces AWStats speed by 2% # allphones reduces AWStats speed by 5% LevelForOSDetection=2 # 0 disables OS detection. # 2 reduces AWStats speed by 3% LevelForRefererAnalyze=2 # 0 disables Origin detection. # 2 reduces AWStats speed by 14% LevelForRobotsDetection=2 # 0 disables Robots detection. # 2 reduces AWStats speed by 2.5% LevelForSearchEnginesDetection=2 # 0 disables Search engines detection. # 2 reduces AWStats speed by 9% LevelForKeywordsDetection=2 # 0 disables Keyphrases/Keywords detection. # 2 reduces AWStats speed by 1% LevelForFileTypesDetection=2 # 0 disables File types detection. # 2 reduces AWStats speed by 1% LevelForWormsDetection=0 # 0 disables Worms detection. # 2 reduces AWStats speed by 15% #----------------------------------------------------------------------------- # OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features) #----------------------------------------------------------------------------- # When you use AWStats as a CGI, you can have the reports shown in HTML frames. # Frames are only available for report viewed dynamically. When you build # pages from command line, this option is not used and no frames are built. # Possible values: 0 or 1 # Default: 1 # UseFramesWhenCGI=1 # This parameter asks your browser to open detailed reports into a different # window than the main page. # Possible values: # 0 - Open all in same browser window # 1 - Open detailed reports in another window except if using frames # 2 - Open always in a different window even if reports are framed # Default: 1 # DetailedReportsOnNewWindows=1 # You can add, in the HTML report page, a cache lifetime (in seconds) that # will be returned to the browser in HTTP header answer by server. # This parameter is not used when reports are built with -staticlinks option. # Example: 3600 # Default: 0 # Expires=0 # To avoid too large web pages, you can ask AWStats to limit number of rows of # all reported charts to this number when no other limits apply. # Default: 10000 # MaxRowsInHTMLOutput=10000 # Set your primary language (ISO-639-1 language codes). # Possible values: # Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca, # Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz, # Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi, # French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu, # Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko, # Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl, # Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru, # Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr, # Ukrainian=ua, Welsh=cy. # First available language accepted by browser=auto # Default: "auto" # Lang="auto" # Set the location of language files. # Example: "/usr/share/awstats/lang" # Default: "./lang" (means lang directory is in same location than awstats.pl) # DirLang="/usr/share/awstats/lang" # Show menu header with reports' links # Possible values: 0 or 1 # Default: 1 # ShowMenu=1 # You choose here which reports you want to see in the main page and what you # want to see in those reports. # Possible values: # 0 - Report is not shown at all # 1 - Report is shown in main page with an entry in menu and default columns # XYZ - Report shows column informations defined by code X,Y,Z... # X,Y,Z... are code letters among the following: # U = Unique visitors # V = Visits # P = Number of pages # H = Number of hits (or mails) # B = Bandwidth (or total mail size for mail logs) # L = Last access date # E = Entry pages # X = Exit pages # C = Web compression (mod_gzip,mod_deflate) # M = Average mail size (mail logs) # # Show monthly summary # Context: Web, Streaming, Mail, Ftp # Default: UVPHB, Possible column codes: UVPHB ShowSummary=UVPHB # Show monthly chart # Context: Web, Streaming, Mail, Ftp # Default: UVPHB, Possible column codes: UVPHB ShowMonthStats=UVPHB # Show days of month chart # Context: Web, Streaming, Mail, Ftp # Default: VPHB, Possible column codes: VPHB ShowDaysOfMonthStats=VPHB # Show days of week chart # Context: Web, Streaming, Mail, Ftp # Default: PHB, Possible column codes: PHB ShowDaysOfWeekStats=PHB # Show hourly chart # Context: Web, Streaming, Mail, Ftp # Default: PHB, Possible column codes: PHB ShowHoursStats=PHB # Show domains/country chart # Context: Web, Streaming, Mail, Ftp # Default: PHB, Possible column codes: UVPHB ShowDomainsStats=PHB # Show hosts chart # Context: Web, Streaming, Mail, Ftp # Default: PHBL, Possible column codes: PHBL ShowHostsStats=PHBL # Show authenticated users chart # Context: Web, Streaming, Ftp # Default: 0, Possible column codes: PHBL ShowAuthenticatedUsers=0 # Show robots chart # Context: Web, Streaming # Default: HBL, Possible column codes: HBL ShowRobotsStats=HBL # Show worms chart # Context: Web, Streaming # Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL ShowWormsStats=0 # Show email senders chart (For use when analyzing mail log files) # Context: Mail # Default: 0, Possible column codes: HBML ShowEMailSenders=0 # Show email receivers chart (For use when analyzing mail log files) # Context: Mail # Default: 0, Possible column codes: HBML ShowEMailReceivers=0 # Show session chart # Context: Web, Streaming, Ftp # Default: 1, Possible column codes: None ShowSessionsStats=1 # Show pages-url chart. # Context: Web, Streaming, Ftp # Default: PBEX, Possible column codes: PBEX ShowPagesStats=PBEX # Show file types chart. # Context: Web, Streaming, Ftp # Default: HB, Possible column codes: HBC ShowFileTypesStats=HB # Show file size chart (Not yet available) # Context: Web, Streaming, Mail, Ftp # Default: 1, Possible column codes: None ShowFileSizesStats=0 # Show downloads chart. # Context: Web, Streaming, Ftp # Default: HB, Possible column codes: HB ShowDownloadsStats=HB # Show operating systems chart # Context: Web, Streaming, Ftp # Default: 1, Possible column codes: None ShowOSStats=1 # Show browsers chart # Context: Web, Streaming # Default: 1, Possible column codes: None ShowBrowsersStats=1 # Show screen size chart # Context: Web, Streaming # Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None ShowScreenSizeStats=0 # Show origin chart # Context: Web, Streaming # Default: PH, Possible column codes: PH ShowOriginStats=PH # Show keyphrases chart # Context: Web, Streaming # Default: 1, Possible column codes: None ShowKeyphrasesStats=1 # Show keywords chart # Context: Web, Streaming # Default: 1, Possible column codes: None ShowKeywordsStats=1 # Show misc chart # Context: Web, Streaming # Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp ShowMiscStats=a # Show http errors chart # Context: Web, Streaming # Default: 1, Possible column codes: None ShowHTTPErrorsStats=1 # Show http error page details # Context: Web, Streaming # Default: R, Possible column codes: RH ShowHTTPErrorsPageDetail=R # Show smtp errors chart (For use when analyzing mail log files) # Context: Mail # Default: 0, Possible column codes: None ShowSMTPErrorsStats=0 # Show the cluster report (Your LogFormat must contains the %cluster tag) # Context: Web, Streaming, Ftp # Default: 0, Possible column codes: PHB ShowClusterStats=0 # Some graphical reports are followed by the data array of values. # If you don't want this array (to reduce the report size for example), you # can set thoose options to 0. # Possible values: 0 or 1 # Default: 1 # # Data array values for the ShowMonthStats report AddDataArrayMonthStats=1 # Data array values for the ShowDaysOfMonthStats report AddDataArrayShowDaysOfMonthStats=1 # Data array values for the ShowDaysOfWeekStats report AddDataArrayShowDaysOfWeekStats=1 # Data array values for the ShowHoursStats report AddDataArrayShowHoursStats=1 # In the Origin chart, you have stats on where your hits came from. You can # include hits on pages that come from pages of same sites in this chart. # Possible values: 0 or 1 # Default: 0 # IncludeInternalLinksInOriginSection=0 # The following parameters can be used to choose the maximum number of lines # shown for the particular following reports. # # Stats by countries/domains MaxNbOfDomain = 10 MinHitDomain = 1 # Stats by hosts MaxNbOfHostsShown = 10 MinHitHost = 1 # Stats by authenticated users MaxNbOfLoginShown = 10 MinHitLogin = 1 # Stats by robots MaxNbOfRobotShown = 10 MinHitRobot = 1 # Stats for Downloads MaxNbOfDownloadsShown = 10 MinHitDownloads = 1 # Stats by pages MaxNbOfPageShown = 10 MinHitFile = 1 # Stats by OS MaxNbOfOsShown = 10 MinHitOs = 1 # Stats by browsers MaxNbOfBrowsersShown = 10 MinHitBrowser = 1 # Stats by screen size MaxNbOfScreenSizesShown = 5 MinHitScreenSize = 1 # Stats by window size (following 2 parameters are not yet used) MaxNbOfWindowSizesShown = 5 MinHitWindowSize = 1 # Stats by referers MaxNbOfRefererShown = 10 MinHitRefer = 1 # Stats for keyphrases MaxNbOfKeyphrasesShown = 10 MinHitKeyphrase = 1 # Stats for keywords MaxNbOfKeywordsShown = 10 MinHitKeyword = 1 # Stats for sender or receiver emails MaxNbOfEMailsShown = 20 MinHitEMail = 1 # Choose if you want the week report to start on sunday or monday # Possible values: # 0 - Week starts on sunday # 1 - Week starts on monday # Default: 1 # FirstDayOfWeek=1 # List of visible flags that link to other language translations. # See Lang parameter for list of allowed flag/language codes. # If you don't want any flag link, set ShowFlagLinks to "". # This parameter is used only if ShowMenu parameter is set to 1. # Possible values: "" or "language_codes_separated_by_space" # Example: "en es fr nl de" # Default: "" # ShowFlagLinks="" # Each URL, shown in stats report views, are links you can click. # Possible values: 0 or 1 # Default: 1 # ShowLinksOnUrl=1 # When AWStats builds HTML links in its report pages, it starts those links # with "http://". However some links might be HTTPS links, so you can enter # here the root of all your HTTPS links. If all your site is a SSL web site, # just enter "/". # This parameter is not used if ShowLinksOnUrl is 0. # Example: "/shopping" # Example: "/" # Default: "" # UseHTTPSLinkForUrl="" # Maximum length of URL part shown on stats page (number of characters). # This affects only URL visible text, links still work. # Default: 64 # MaxLengthOfShownURL=64 # You can enter HTML code that will be added at the top of AWStats reports. # Default: "" # HTMLHeadSection="" # You can enter HTML code that will be added at the end of AWStats reports. # Great to add advert ban. # Default: "" # HTMLEndSection="" # By default AWStats page contains meta tag robots=noindex,nofollow # If you want to have your statistics to be indexed, set this option to 1. # Default: 0 # MetaRobot=0 # You can set Logo and LogoLink to use your own logo. # Logo must be the name of image file (must be in $DirIcons/other directory). # LogoLink is the expected URL when clicking on Logo. # Default: "awstats_logo6.png" # Logo="awstats_logo6.png" LogoLink="http://www.awstats.org" # Value of maximum bar width/height for horizontal/vertical HTML graphics bars. # Default: 260/90 # BarWidth = 260 BarHeight = 90 # You can ask AWStats to use a particular CSS (Cascading Style Sheet) to # change its look. To create a style sheet, you can use samples provided with # AWStats in wwwroot/css directory. # Example: "/awstatscss/awstats_bw.css" # Example: "/css/awstats_bw.css" # Default: "" # StyleSheet="" # Those color parameters can be used (if StyleSheet parameter is not used) # to change AWStats look. # Example: color_name="RRGGBB" # RRGGBB is Red Green Blue components in Hex # color_Background="FFFFFF" # Background color for main page (Default = "FFFFFF") color_TableBGTitle="CCCCDD" # Background color for table title (Default = "CCCCDD") color_TableTitle="000000" # Table title font color (Default = "000000") color_TableBG="CCCCDD" # Background color for table (Default = "CCCCDD") color_TableRowTitle="FFFFFF" # Table row title font color (Default = "FFFFFF") color_TableBGRowTitle="ECECEC" # Background color for row title (Default = "ECECEC") color_TableBorder="ECECEC" # Table border color (Default = "ECECEC") color_text="000000" # Color of text (Default = "000000") color_textpercent="606060" # Color of text for percent values (Default = "606060") color_titletext="000000" # Color of text title within colored Title Rows (Default = "000000") color_weekend="EAEAEA" # Color for week-end days (Default = "EAEAEA") color_link="0011BB" # Color of HTML links (Default = "0011BB") color_hover="605040" # Color of HTML on-mouseover links (Default = "605040") color_u="FFAA66" # Background color for number of unique visitors (Default = "FFAA66") color_v="F4F090" # Background color for number of visites (Default = "F4F090") color_p="4477DD" # Background color for number of pages (Default = "4477DD") color_h="66DDEE" # Background color for number of hits (Default = "66DDEE") color_k="2EA495" # Background color for number of bytes (Default = "2EA495") color_s="8888DD" # Background color for number of search (Default = "8888DD") color_e="CEC2E8" # Background color for number of entry pages (Default = "CEC2E8") color_x="C1B2E2" # Background color for number of exit pages (Default = "C1B2E2") #----------------------------------------------------------------------------- # PLUGINS #----------------------------------------------------------------------------- # Add here all plugin files you want to load. # Plugin files must be .pm files stored in 'plugins' directory. # Uncomment LoadPlugin lines to enable a plugin after checking that perl # modules required by the plugin are installed. # PLUGIN: Tooltips # REQUIRED MODULES: None # PARAMETERS: None # DESCRIPTION: Add tooltips pop-up help boxes to HTML report pages. # NOTE: This will increased HTML report pages size, thus server load and bandwidth. # #LoadPlugin="tooltips" # PLUGIN: DecodeUTFKeys # REQUIRED MODULES: Encode and URI::Escape # PARAMETERS: None # DESCRIPTION: Allow AWStats to show correctly (in language charset) # keywords/keyphrases strings even if they were UTF8 coded by the # referer search engine. # #LoadPlugin="decodeutfkeys" # PLUGIN: IPv6 # PARAMETERS: None # REQUIRED MODULES: Net::IP and Net::DNS # DESCRIPTION: This plugin gives AWStats capability to make reverse DNS # lookup on IPv6 addresses. # #LoadPlugin="ipv6" # PLUGIN: HashFiles # REQUIRED MODULES: Storable # PARAMETERS: None # DESCRIPTION: AWStats DNS cache files are read/saved as native hash files. # This increases DNS cache files loading speed, above all for very large web sites. # LoadPlugin="hashfiles" # PLUGIN: UserInfo # REQUIRED MODULES: None # PARAMETERS: None # DESCRIPTION: Add a text (Firtname, Lastname, Office Department, ...) in # authenticated user reports for each login value. # A text file called userinfo.myconfig.txt, with two fields (first is login, # second is text to show, separated by a tab char) must be created in DirData # directory. # #LoadPlugin="userinfo" # PLUGIN: HostInfo # REQUIRED MODULES: Net::XWhois # PARAMETERS: None # DESCRIPTION: Add a column into host chart with a link to open a popup window that shows # info on host (like whois records). # #LoadPlugin="hostinfo" # PLUGIN: ClusterInfo # REQUIRED MODULES: None # PARAMETERS: None # DESCRIPTION: Add a text (for example a full hostname) in cluster reports for each cluster # number. A text file called clusterinfo.myconfig.txt, with two fields (first is # cluster number, second is text to show) separated by a tab char. must be # created into DirData directory. # Note this plugin is useless if ShowClusterStats is set to 0 or if you don't # use a personalized log format that contains %cluster tag. # #LoadPlugin="clusterinfo" # PLUGIN: UrlAliases # REQUIRED MODULES: None # PARAMETERS: None # DESCRIPTION: Add a text (Page title, description...) in URL reports before URL value. # A text file called urlalias.myconfig.txt, with two fields (first is URL, # second is text to show, separated by a tab char) must be created into # DirData directory. # #LoadPlugin="urlalias" # PLUGIN: TimeHiRes # REQUIRED MODULES: Time::HiRes (if Perl < 5.8) # PARAMETERS: None # DESCRIPTION: Time reported by -showsteps option is in millisecond. For debug purpose. # #LoadPlugin="timehires" # PLUGIN: TimeZone # REQUIRED MODULES: Time::Local # PARAMETERS: [timezone offset] # DESCRIPTION: Allow AWStats to adjust time stamps for a different timezone # This plugin reduces AWStats speed of 10% !!!!!!! # LoadPlugin="timezone" # LoadPlugin="timezone +2" # LoadPlugin="timezone CET" # #LoadPlugin="timezone +2" # PLUGIN: Rawlog # REQUIRED MODULES: None # PARAMETERS: None # DESCRIPTION: This plugin adds a form in AWStats main page to allow users to see raw # content of current log files. A filter is also available. # #LoadPlugin="rawlog" # PLUGIN: GraphApplet # REQUIRED MODULES: None # PARAMETERS: [CSS classes to override] # DESCRIPTION: Supported charts are built by a 3D graphic applet. # #LoadPlugin="graphapplet /awstatsclasses" # EXPERIMENTAL FEATURE # PLUGIN: GraphGoogleChartAPI # REQUIRED MODULES: None # PARAMETERS: None # DESCRIPTION: Replaces the standard charts with free Google API generated images # in HTML reports. If country data is available and more than one country has hits, # a map will be generated using Google Visualizations. # Note: The machine where reports are displayed must have Internet access for the # charts to be generated. The only data sent to Google includes the statistic numbers, # legend names and country names. # Warning: This plugin is not compatible with option BuildReportFormat=xhtml. # #LoadPlugin="graphgooglechartapi" # PLUGIN: GeoIPfree # REQUIRED MODULES: Geo::IPfree version 0.2+ (from Graciliano M.P.) # PARAMETERS: None # DESCRIPTION: Country chart is built from an Internet IP-Country database. # This plugin is useless for intranet only log files. # Note: You must choose between using this plugin (need Perl Geo::IPfree # module, database is free but not up to date) or the GeoIP plugin (need # Perl Geo::IP module from Maxmind, database is also free and up to date). # Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl # module, so install it from elsewhere (from www.cpan.org for example). # This plugin reduces AWStats speed by up to 10% ! # #LoadPlugin="geoipfree" # MAXMIND GEO IP MODULES: Please see documentation for notes on all Maxmind modules # PLUGIN: GeoIP # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/geoip.dat[+/pathto/override.txt]] # DESCRIPTION: Builds a country chart and adds an entry to the hosts # table with country name # Replace spaces in the path of geoip data file with string "%20". # #LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat" # PLUGIN: GeoIP2 # REQUIRED MODULES: GeoIP2::Database::Reader (from Maxmind) # PARAMETERS: [/pathto/GeoLite2-Country.mmdb[+/pathto/override.txt]] # DESCRIPTION: Builds a country chart and adds an entry to the hosts # table with country name. This uses the new schema of GeoIP2 replacing # the now expired Legacy schema. # Replace spaces in the path of geoip data file with string "%20". # #LoadPlugin="geoip2_country /pathto/GeoLite2-Country.mmdb" # PLUGIN: GeoIP6 # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind, version >= 1.40) # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/geoipv6.dat[+/pathto/override.txt]] # DESCRIPTION: Builds a country chart and adds an entry to the hosts # table with country name # works with IPv4 and also IPv6 addresses # Replace spaces in the path of geoip data file with string "%20". # #LoadPlugin="geoip6 GEOIP_STANDARD /pathto/GeoIPv6.dat" # PLUGIN: GeoIP_City_Maxmind # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPCity.dat[+/pathto/override.txt]] # DESCRIPTION: This plugin adds a column under the hosts field and tracks the pageviews # and hits by city including regions. # Replace spaces in the path of geoip data file with string "%20". # #LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /usr/share/GeoIP/GeoIPCity.dat" # PLUGIN: GeoIP2_City # REQUIRED MODULES: GeoIP2::Database::Reader (from Maxmind) # PARAMETERS: [/pathto/GeoLite2-City.mmdb[+/pathto/override.txt]] # DESCRIPTION: This plugin adds a column under the hosts field and tracks the pageviews # and hits by city including regions. # Replace spaces in the path of geoip data file with string "%20". # #LoadPlugin="geoip2_city /pathto/GeoLite2-City.mmdb" # PLUGIN: GeoIP_ASN_Maxmind # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPASN.dat[+/pathto/override.txt][+http://linktoASlookup]] # DESCRIPTION: This plugin adds a chart of AS numbers where the host IP address is registered. # This plugin can display some ISP information if included in the database. You can also provide # a link that will be used to lookup additional registration data. Put the link at the end of # the parameter string and the report page will include the link with the full AS number at the end. # Replace spaces in the path of geoip data file with string "%20". # #LoadPlugin="geoip_asn_maxmind GEOIP_STANDARD /usr/local/geoip.dat+http://enc.com.au/itools/autnum.php?asn=" # PLUGIN: GeoIP_Region_Maxmind # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPRegion.dat[+/pathto/override.txt]] # DESCRIPTION:This plugin adds a chart of hits by regions. Only regions for US and # Canada can be detected. # Replace spaces in the path of geoip data file with string "%20". # #LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /usr/share/GeoIP/GeoIPRegion.dat" # PLUGIN: GeoIP_ISP_Maxmind # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPISP.dat[+/pathto/override.txt]] # DESCRIPTION: This plugin adds a chart of hits by ISP. # Replace spaces in the path of geoip data file with string "%20". # #LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /usr/share/GeoIP/GeoIPISP.dat" # PLUGIN: GeoIP_Org_Maxmind # REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind) # PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPOrg.dat[+/pathto/override.txt]] # DESCRIPTION: This plugin add a chart of hits by Organization name # Replace spaces in the path of geoip data file with string "%20". # #LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /usr/share/GeoIP/GeoIPOrg.dat" #----------------------------------------------------------------------------- # EXTRA SECTIONS #----------------------------------------------------------------------------- # You can define your own charts, you choose here what are rows and columns # keys. This feature is particularly useful for marketing purpose, tracking # products orders for example. # For this, edit all parameters of Extra section. Each set of parameter is a # different chart. For several charts, duplicate section changing the number. # Note: Each Extra section reduces AWStats speed by 8%. # # WARNING: A wrong setup of Extra section might result in too large arrays # that will consume all your memory, making AWStats unusable after several # updates, so be sure to setup it correctly. # In most cases, you don't need this feature. # # ExtraSectionNameX is title of your personalized chart. # ExtraSectionCodeFilterX is list of codes the record code field must match. # Put an empty string for no test on code. # ExtraSectionConditionX are conditions you can use to count or not the hit, # Use one of the field condition # (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOSTINLOG,HOST,VHOST,extraX) # and a regex to match, after a coma. Use "||" for "OR". # ExtraSectionFirstColumnTitleX is the first column title of the chart. # ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to # extract value from # (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOSTINLOG,HOST,VHOST,extraX) # and how to extract the value (using regex syntax). Each different value # found will appear in first column of report on a different row. Be sure # that list of different possible values will not grow indefinitely. # ExtraSectionFirstColumnFormatX is the string used to write value. # ExtraSectionStatTypesX are things you want to count. You can use standard # code letters (P for pages,H for hits,B for bandwidth,L for last access). # ExtraSectionAddAverageRowX add a row at bottom of chart with average values. # ExtraSectionAddSumRowX add a row at bottom of chart with sum values. # MaxNbOfExtraX is maximum number of rows shown in chart. # MinHitExtraX is minimum number of hits required to be shown in chart. # # Example to report the 20 products the most ordered by "order.cgi" script #ExtraSectionName1="Product orders" #ExtraSectionCodeFilter1="200 304" #ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi" #ExtraSectionFirstColumnTitle1="Product ID" #ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)" #ExtraSectionFirstColumnFormat1="%s" #ExtraSectionStatTypes1=PL #ExtraSectionAddAverageRow1=0 #ExtraSectionAddSumRow1=1 #MaxNbOfExtra1=20 #MinHitExtra1=1 # There is also a global parameter ExtraTrackedRowsLimit that limits the # number of possible rows an ExtraSection can report. This parameter is # here to protect too much memory use when you make a bad setup in your # ExtraSection. It applies to all ExtraSection independently meaning that # none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit. # If you know an ExtraSection will report more rows than its value, you should # increase this parameter or AWStats will stop with an error. # Example: 2000 # Default: 500 # ExtraTrackedRowsLimit=500 #----------------------------------------------------------------------------- # INCLUDES #----------------------------------------------------------------------------- # You can include other config files using the directive with the name of the # config file. # This is particularly useful for users who have a lot of virtual servers, so # a lot of config files and want to maintain common values in only one file. # Note that when a variable is defined both in a config file and in an # included file, AWStats will use the last value read for parameters that # contains one value and AWStats will concat all values from both files for # parameters that are lists of values. # Include "/etc/awstats/awstats.conf.local"