1#@!#!123s

: / usr / share / doc / psa-proftpd / howto /
Filename : Radius.html
back
<!DOCTYPE html>
<html>
<head>
<title>ProFTPD: RADIUS</title>
</head>

<body bgcolor=white>

<hr>
<center><h2><b>ProFTPD: RADIUS</b></h2></center>
<hr>
Some sites use the <a href="http://en.wikipedia.org/wiki/RADIUS">RADIUS</a>
protocol for authenticating users.  For these sites, there is the
<a href="../contrib/mod_radius.html"><code>mod_radius</code></a> ProFTPD module.

<p>
<b>Common Configurations</b></br>
First, let's start with the most basic <code>mod_radius</code> configuration,
where we want to use the RADIUS server <b>only</b> for validating the user's
password:
<pre>
  &lt;IfModule mod_radius.c&gt;
    AuthOrder mod_radius.c mod_auth_unix.c mod_auth_file.c

    RadiusEngine on
    RadiusAuthServer localhost:1812 testing123 5
    RadiusLog /etc/proftpd/radius.log
  &lt;/IfModule&gt;
</pre>
Here, we have told <code>mod_radius</code> the IP address of the RADIUS
server via the <a href="../contrib/mod_radius.html#RadiusAuthServer"><code>RadiusAuthServer</code></a> directive, which includes the port, shared secret,
and default timeout value (in seconds).

<p>
Since this configuration only uses the RADIUS server for validating the
password, we still need to get the user's UID, GID, home directory, group
membership, <i>etc</i> from somewhere.  Thus we need the <code>AuthOrder</code>
directive to tell <code>proftpd</code> to use the
<a href="../modules/mod_auth_unix.html"><code>mod_auth_unix</code></a> and
<a href="../modules/mod_auth_file.html"><code>mod_auth_file</code></a> modules
as well.

<p>
Using the above configuration, when a client connects and sends the
<code>USER</code> and <code>PASS</code> FTP commands, the
<code>mod_radius</code> module will send an <code>Access-Request</code> RADIUS
packet to the RADIUS server, which will include the following attributes:
<pre>
  <b>Service-Type 8</b> (<i>i.e.</i> Authenticate-Only)
  User-Name <em>username</em>
  User-Password <em>password</em>
  NAS-Identifier "ftp"
  NAS-IP-Address (<i>or</i> NAS-IPv6-Address) <em>server-ip-address</em>
  NAS-Port <em>server-port</em>
  NAS-Port-Type 5 (<i>i.e.</i> Virtual)
  Calling-Station-Id <em>client-ip-address</em>
  Acct-Session-Id <em>session-pid</em>
  Message-Authenticator <em>mac</em>
</pre>
If the RADIUS server responds with an <code>Access-Accept</code> packet, then
the login succeeds, and the FTP session is establish.  If, on the other hand,
the RADIUS server responds with <code>Access-Reject</code>, the login fails.
(The <code>mod_radius</code> module does not currently support the
<code>Access-Challenge</code> packet type.)

<p>
Now, let's examine a slightly more complex configuration, which enables the
use of RADIUS accounting:
<pre>
  &lt;IfModule mod_radius.c&gt;
    AuthOrder mod_radius.c mod_auth_unix.c mod_auth_file.c

    RadiusEngine on
    RadiusAuthServer localhost:1812 testing123 5
    RadiusAcctServer localhost:1813 testing123 5
    RadiusLog /etc/proftpd/radius.log
  &lt;/IfModule&gt;
</pre>
The additional directive here is the <a href="../contrib/mod_radius.html#RadiusAcctServer"><code>RadiusAcctSerer</code></a> directive, which is quite similar
to the <code>RadiusAuthServer</code> directive.  The use of the
<code>RadiusAcctServer</code> directive instructs <code>mod_radius</code> to
use RADIUS accounting.

<p>
With this configuration, <code>mod_radius</code> will do the same as before.
In addition, once the login has succeeded, <code>mod_radius</code> will send
an <code>Accounting-Request</code> packet to the RADIUS accounting server
which includes:
<pre>
  User-Name <em>username</em>
  <b>Acct-Status-Type 1</b> (<i>i.e.</i> Start)
  Acct-Session-Id <em>session-pid</em>
  Acct-Authentic 1 (<i>i.e.</i> Local)
  Event-Timestamp <em>timestamp</em>
</pre>
Then, when the client disconnects, <code>mod_radius</code> sends another
<code>Accounting-Request</code> packet, this time with a lot of information
about the just-ended session:
<pre>
  User-Name <em>username</em>
  <b>Acct-Status-Type 2</b> (<i>i.e.</i> Stop)
  Acct-Session-Id <em>session-pid</em>
  Acct-Authentic 1 (<i>i.e.</i> Local)
  Acct-Session-Time <em>session-duration</em>
  Acct-Input-Octets <em>bytes-in</em>
  Acct-Output-Octets <em>bytes-out</em>
  Acct-Terminate-Cause <em>cause</em>
  Event-Timestamp <em>timestamp</em>
  Class <em>class</em> (if provided in <code>Access-Accept</code>)
</pre>

<p>
The above configurations are the most common, as RADIUS is normally used
only as way of checking whether a client should be allowed to connect, based
on username/password.

<p>
<b>Sophisticated Configurations</b></br>
It is possible to use RADIUS as the sole means of user authentication, rather
than just validating passwords.  The <code>mod_radius</code> configuration
to do so would look like:
<pre>
  &lt;IfModule mod_radius.c&gt;
    AuthOrder mod_radius.c

    RadiusEngine on
    RadiusAuthServer localhost:1812 testing123 5
    RadiusAcctServer localhost:1813 testing123 5
    RadiusLog /etc/proftpd/radius.log

    # Use RADIUS Vendor-Specific Attributes (VSAs) for user details 
    RadiusVendor Unix 4
    RadiusUserInfo $(10:1000) $(11:1000) $(12:/tmp) $(13:/bin/bash)
    RadiusGroupInfo $(14:users,ftpd) $(15:500,501)
  &lt;/IfModule&gt;
</pre>
The key difference here is the use of the <a href="../contrib/mod_radius.html#RadiusUserInfo"><code>RadiusUserInfo</code></a> directive.  Its appearance within
the configuration is what instructs <code>mod_radius</code> to do more than
just password validation.  The <code>RadiusUserInfo</code> and <a href="../contrib/mod_radius.html#RadiusGroupInfo"><code>RadiusGroupInfo</code></a> directives
together tell <code>mod_radius</code> where to find the necessary information
about a user, such as the UID, GID, home directory, group membership,
<i>etc</i> in the response packets from the RADIUS server.

<p>
To let the RADIUS server know that we are expecting it do more than just
validate the password, the <code>Access-Request</code> packet will use a
different <code>Service-Type</code> attribute.  Now the packet will look like:
<pre>
  <b>Service-Type 1</b> (<i>i.e.</i> Login)
  User-Name <em>username</em>
  User-Password <em>password</em>
  NAS-Identifier "ftp"
  NAS-IP-Address (<i>or</i> NAS-IPv6-Address) <em>server-ip-address</em>
  NAS-Port <em>server-port</em>
  NAS-Port-Type 5 (<i>i.e.</i> Virtual)
  Calling-Station-Id <em>client-ip-address</em>
  Acct-Session-Id <em>session-pid</em>
  Message-Authenticator <em>mac</em>
</pre>

<p>
Upon receiving the <code>Access-Accept</code> packet, <code>mod_radius</code>
will now look for specific <a href="http://en.wikipedia.org/wiki/RADIUS#Attribute_value_pairs">attributes</a>, bearing user details, within the packet.
What attributes does it look for?  Answer: <a href="http://en.wikipedia.org/wiki/RADIUS#Vendor-specific_attributes">Vendor-Specific Attributes</a> (commonly
called "VSAs").

<p>
Every VSA is prefixed with a vendor ID, followed by an attribute ID/value which
are defined by that vendor.  For example, Cisco has a vendor ID of 9,
Microsoft has a vendor ID of 311, and "Unix" has a vendor ID of 4.  (For the
curious, these vendor IDs, per <a href="http://tools.ietf.org/search/rfc2865#section-5.26">RFC 2865, Section 5.26</a>, come from the <a href="http://www.iana.org/assignments/enterprise-numbers/enterprise-numbers">IANA Enterprise Numbers</a> registry.)

<p>
With this background, we can explain the <code>RadiusUserInfo</code> and
<code>RadiusGroupInfo</code> directives in detail.  Notice that we tell
<code>mod_radius</code> the vendor ID to look for, using the
<a href="../contrib/mod_radius.html#RadiusVendor"><code>RadiusVendor</code></a>
directive:
<pre>
  RadiusVendor Unix 4
</pre>
The above is actually not necessary; <code>mod_radius</code> will look for
VSAs for vendor ID 4 (Unix) by default.  It is useful, though, to make it
explicitly visible in the configuration.

<p>
Let's now see just what the <code>RadiusUserInfo</code> parameters are doing:
<pre>
  RadiusUserInfo $(10:1000) $(11:1000) $(12:/tmp) $(13:/bin/bash)
</pre>
In order for <code>proftpd</code> to log a user in, it needs to know that
user's UID, GID, home directory, and shell.  And the <code>RadiusUserInfo</code>
parameters say where to find those values, in that order.

<p>
For UIDs, &quot;$(10:<em>1000</em>)&quot; says to look for a vendor-specific
attribute ID of 10.  If we find such an attribute, use the attribute value as
the UID.  Otherwise, use <em>1000</em> as the UID for the user logging in.

<p>
For GIDs, &quot;$(11:<em>1000</em>)&quot; says to look for a vendor-specific
attribute ID of 11.  If we find such an attribute, use the attribute value as
the GID.  Otherwise, use <em>1000</em> as the GID for the user logging in.

<p>
For home directories, &quot;$(12:<em>/tmp</em>)&quot; says to look for a
vendor-specific attribute ID of 12.  If we find such an attribute, use the
attribute value as the home directory.  Otherwise, use <em>/tmp</em> as the
home directory for the user logging in.

<p>
And for the shell, &quot;$(13:<em>/bin/bash</em>)&quot; says to look for a
vendor-specific attribute ID of 13.  If we find such an attribute, use the
attribute value as the shell.  Otherwise, use <em>/bin/bash</em> as the shell
for the user logging in.

<p>
The <code>RadiusGroupInfo</code> directive is very similar: it tells
<code>mod_radius</code> which VSAs will contain the group membership, both
in terms of group IDs and group names, for the logging in user:
<pre>
  RadiusGroupInfo $(14:users,ftpd) $(15:500,501)
</pre>

<p>
For group names, &quot;$(14:<em>users,ftpd</em>)&quot; says to look for a
vendor-specific attribute ID of 14.  If we find such an attribute, use the
attribute value as the comma-separated list of supplemental group names.
Otherwise, use <em>users,ftpd</em> as the group names for the user logging in.

<p>
For group IDs, &quot;$(15:<em>500,501</em>)&quot; says to look for a
vendor-specific attribute ID of 15.  If we find such an attribute, use the
attribute value as the comma-separated list of supplemental group IDs.
Otherwise, use <em>500,501</em> as the group IDs for the user logging in.

<p>
<b>FreeRADIUS Configuration</b><br>
To help demonstrate how you would configure and use VSAs, I will show the
<a href="http://freeradius.org/">FreeRADIUS</a> configuration that I used for
development and testing.

<p>
Here is the FreeRADIUS <code>dictionary.unix</code> file I used (slightly
modified from the stock <code>dictionary.unix</code> file distributed with
FreeRADIUS); this file defines the attributes supported for the "Unix"
vendor:
<pre>
  VENDOR          Unix    4

  BEGIN-VENDOR Unix

  ATTRIBUTE       Unix-User-UID            10      integer
  ATTRIBUTE       Unix-User-GID            11      integer
  ATTRIBUTE       Unix-User-Home           12      string
  ATTRIBUTE       Unix-User-Shell          13      string
  ATTRIBUTE       Unix-User-Group-Names    14      string
  ATTRIBUTE       Unix-User-Group-Ids      15      string

  END-VENDOR Unix
</pre>
You can see how:
<pre>
  VENDOR          Unix    4
</pre>
here corresponds to the <code>mod_radius</code> configuration line:
<pre>
  RadiusVendor Unix 4
</pre>

<p>
The following attribute IDs are what we use in our <code>mod_radius</code>
directives:
<pre>
  ATTRIBUTE       Unix-User-UID            <b><i>10</i></b>      integer
  ATTRIBUTE       Unix-User-GID            <b><i>11</i></b>      integer
  ATTRIBUTE       Unix-User-Home           <b><i>12</i></b>      string
  ATTRIBUTE       Unix-User-Shell          <b><i>13</i></b>      string
</pre>
which match up with our <code>RadiusUserInfo</code> parameters:
<pre>
  RadiusUserInfo $(<b><i>10</i></b>:1000) $(<b><i>11</i></b>:1000) $(<b><i>12</i></b>:/tmp) $(<b><i>13</i></b>:/bin/bash)
</pre>

<p>
Similarly for the group membership attributes, <code>dictionary.unix</code>
has:
<pre>
  ATTRIBUTE       Unix-User-Group-Names    <b><i>14</i></b>      string
  ATTRIBUTE       Unix-User-Group-Ids      <b><i>15</i></b>      string
</pre>
and our <code>RadiusGroupInfo</code> parameters are:
<pre>
  RadiusGroupInfo $(<b><i>14</i></b>:users,ftpd) $(<b><i>15</i></b>:500,501)
</pre>

<p>
Note that only the IDs (numbers) for attributes are used in the RADIUS packets
sent between clients/servers.  The attribute names are to make the configuration
and logging more human-readable.

<p>
Now, in order to tell FreeRADIUS that we want it to <i>include</i> those
VSAs in its <code>Access-Accept</code> packet back to <code>mod_radius</code>,
we have to modify the FreeRADIUS <code>users</code> file, like so:
<pre>
  DEFAULT Auth-Type := System
          Unix-User-UID := 500,
          Unix-User-GID := 500,
          Unix-User-Home := "/home/tj",
          Unix-User-Shell := "/bin/bash",
          Unix-User-Group-Names := "radius,ftpd",
          Unix-User-Group-Ids := "200,501",
          Fall-Through = 1
</pre>
See the FreeRADIUS documentation for the <code>users</code> file format in
order to learn how to configure different UID/GID/home/group values for each
user in that file.

<p>
<b>Obtaining Quota Information via RADIUS</b><br>
If you use the <a href="../contrib/mod_quotatab.html"><code>mod_quotatab</code></a> module for quota support in <code>proftpd</code>, <b>and</b> you use the
<code>mod_radius</code> module for authentication, then you might also be
interesting in getting your quota information from your RADIUS server, much
like you can get user details from the RADIUS server.

<p>
The mechanism is identical that used for user details, <i>i.e.</i>
vendor-specific attributes (VSAs).  Assuming that you are using FreeRADIUS,
you would add the following to your FreeRADIUS <code>dictionary.unix</code>
file:
<pre>
  ATTRIBUTE       Unix-FTP-Quota-Per-Session      <b><i>106</i></b>      string
  ATTRIBUTE       Unix-FTP-Quota-Limit-Type       <b><i>107</i></b>      string
  ATTRIBUTE       Unix-FTP-Quota-Bytes-Upload     <b><i>108</i></b>      string
  ATTRIBUTE       Unix-FTP-Quota-Bytes-Download   <b><i>109</i></b>      string
  ATTRIBUTE       Unix-FTP-Quota-Bytes-Transfer   <b><i>110</i></b>      string
  ATTRIBUTE       Unix-FTP-Quota-Files-Upload     <b><i>111</i></b>      string
  ATTRIBUTE       Unix-FTP-Quota-Files-Download   <b><i>112</i></b>      string
  ATTRIBUTE       Unix-FTP-Quota-Files-Transfer   <b><i>113</i></b>      string
</pre>
and in the FreeRADIUS <code>users</code> file (assuming the above user-related
attributes as well):
<pre>
  DEFAULT Auth-Type := System
          Unix-User-UID := 500,
          Unix-User-GID := 500,
          Unix-User-Home := "/home/tj",
          Unix-User-Shell := "/bin/bash",
          Unix-User-Group-Names := "radius,ftpd",
          Unix-User-Group-Ids := "200,501",
          Unix-FTP-Quota-Per-Session := "false",
          Unix-FTP-Quota-Limit-Type := "soft",
          Unix-FTP-Quota-Bytes-Upload := "1.1",
          Unix-FTP-Quota-Bytes-Download := "2.2",
          Unix-FTP-Quota-Bytes-Transfer := "3.3",
          Unix-FTP-Quota-Files-Upload := "4",
          Unix-FTP-Quota-Files-Download := "5",
          Unix-FTP-Quota-Files-Transfer := "6",
          Fall-Through = 1
</pre>
and then, to tell <code>mod_radius</code> that it should look for quota-related
VSAs in the <code>Access-Accept</code> RADIUS packet, there is the aptly-named
<a href="../contrib/mod_radius.html#RadiusQuotaInfo"><code>RadiusQuotaInfo</code></a> directive:
<pre>
  RadiusQuotaInfo $(<b><i>106</i></b>:false) $(<b><i>107</i></b>:hard) $(<b><i>108</i></b>:40.0) $(<b><i>109</i></b>:0.0) $(<b><i>110</i></b>:0.0) $(<b><i>111</i></b>:0) $(<b><i>112</i></b>:0) $(<b><i>113</i></b>:0)
</pre>

<p><a name="FAQ">
<b>Frequently Asked Questions</b><br>
<font color=red>Question</font>: Do I have to configure my RADIUS server to
return VSAs in order to use <code>mod_radius</code>?<br>
<font color=blue>Answer</font>: No.  As shown above, <code>mod_radius</code>
is usually used just for validating user credentials.

<p>
It is also possible to use only <code>mod_radius</code> for user authentication,
without needing VSAs.  For example, using a configuration like this will
do what you need:
<pre>
  &lt;IfModule mod_radius.c&gt;
    AuthOrder mod_radius.c

    RadiusEngine on
    RadiusAuthServer localhost:1812 testing123 5
    RadiusAcctServer localhost:1813 testing123 5
    RadiusLog /etc/proftpd/radius.log

    RadiusUserInfo 1000 1000 /tmp /bin/bash
    RadiusGroupInfo ftpd 1000
  &lt;/IfModule&gt;
</pre>
Notice how the <code>RadiusUserInfo</code> and <code>RadiusGroupInfo</code>
directives do not use the "$(<i>N</i>:<i>M</i>)" syntax?  That means that
we are not telling <code>mod_radius</code> what vendor ID and attribute IDs
to look for.  Instead, we are telling <code>mod_radius</code> to <b>always</b>
use the configured UID, GID, home directory, shell, group membership values.

<p>
<b>Note</b> that this means that all of your logged-in users will have the
exact same UID, GID, and home directory.  For some sites, this is ideal.  Other
sites need to have different UID/GID/homes for each users, and thus they will
use the VSA support.

<p><a name="RadiusAndSSH">
<font color=red>Question</font>: Can I use <code>mod_radius</code> for SFTP
connections?<br>
<font color=blue>Answer</font>: Yes.  However, there are some caveats.  The
main issue that clients which want to use SSH publickey authentication
<b>cannot</b> use RADIUS, since the RADIUS protocol does not define any means
of conveying the public key information from the connecting client to the
RADIUS server.  So only password-based SSH authentication can be supported
using <code>mod_radius</code>.

<p>
<hr>
<font size=2><b><i>
&copy; Copyright 2017 The ProFTPD Project<br>
 All Rights Reserved<br>
</i></b></font>
<hr>

</body>
</html>